Instant Quotation

Worktop Measurements

Measure the length (mm) & width (mm) of each worktop piece that you require and input them into the boxes.

Also include any breakfast bars, island units etc. Based on 30mm thickness granite.

Please ensure your measurements are in mm. 1 m = 1000mm.

Polished Edges

These are the edges of the worktop that will be visible and will need polishing.
Based on straight edge polish with chamfer.

Please ensure your measurements are in mm. 1 m = 1000mm

Polished Cut-Outs

These are the cut-outs for under mounted sinks etc. that require the inner exposed edges to be polished because they will be visible.

Unpolished Cut-Outs

These are the cutouts with an unfinished inner edge that will not be visible, i.e. for hobs and surface mounted sinks etc.

Tap Holes

These are the cut-outs for taps and switch holes, i.e. waste disposal.

Drainer Grooves

(1 Set = 5 Grooves) These are five straight grooves (1 set) in the worktop at one side of the sink which act as a draining board.

Upstands

These can be used instead of tiling the walls. Measure the total length of upstands required.
Quote based on 100mm high 20mm thickness granite.

Please ensure your measurements are in mm. 1 m = 1000mm

Splashback Pieces

This is the granite panel which can be used behind the hob, range and sink to protect the wall from splashes. You can also have full height splashbacks which are positioned on top of the granite work surface to the underside of the wall units.

Measure the length (mm) and width (mm) of each splashback piece that you require and input them into the boxes. Quote based on 20mm thickness granite.

Please ensure your measurements are in mm. 1 m = 1000mm

Free Sample

Would you like to receive a free sample? Please ensure that your details are correct.